Taizhou Shenneng Electric Co., Ltd.
Products
Contact Us
  • Contact Person : Ms. Chen Bella
  • Company Name : Taizhou Shenneng Electric Co., Ltd.
  • Tel : 86-576-86338977
  • Fax : 86-576-86337977
  • Address : Zhejiang,Wenling,Dayangcheng Industrial Zone, Daxi Town, Wenling City, Zhejiang Province. China
  • Country/Region : China
  • Zip : 317525

pressure switch for air compressor

pressure switch for air compressor
Product Detailed
Related Categories:Pressure Switches
pressure switch for air compressor 1.Lowest Pressure (on): 20PSI 2.rated current:12A 3.frequency:50/60HZ

pressure switch for air compressor

1)Female :1/4''

2)Lowest Pressure (on): 20PSI

3)Highest Pressure(off): 175PSI

4)With One-way valve or Four way valve

5)Coverage: USR,CNR---ENCLOSED,THREE POLE,SINGLE PHASE PRESSURE OPERATED SWITCH USED FOR THE AUTO-CONTROL OF AIR PUMP

6)Pressure Setting:40-70PSI,50-80PSI,70-100PSI,80-115PSI,90-125PSI

The product can replace the complicated installations of automatic water pump e.g. pressure gauge, pressure switch, T-valve, check valve and pressure tank ). It has the features of stable performance, low maintenance and long life etc,. It will indicate the pump has started when the green light Power on lights up after connecting the power. When the yellow light Pump on lights up, it indicates the pump has been started. The pump continues to operate for a few minutes enabling the system to fill in the pipes and to reach the required pressure. If this lapse is insufficient, the red light Failure will light up. In this event, keep the Restart button pressed and wait, with a tap opened till the red light is off. Once released the button and closed the tap, the product will keep the pump at its maximum pressure.Function:The product is designed especially for all control operation of automatic water pump. If the particular breakdowns occur, such as water failure, obstruction of the suction pipe etc, the product recognizes the breakdowns and the red lightFailurelights up, at the same a stop signal is sent to the pump to prevent damages caused by its working in the absence of water. Rectification of the failures that have caused the blockage, allows the system to be restarted by pressing theRestartbutton. The controller can ensure a constant pressure for the water supplying system and thus reduce the water hammer effect inside pipeline during water delivering. The controller also possesses the features of reset after power failure. Its starting flow is about 36-60L/h and is convenient for home application.

pressure switch for air compressor



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.